NEWS
Foundry  

Wollin: Newly developed mould spraying machine ESM

At EUROGUSS 2020, Wollin presented the newly developed ESM series in the sizes ESM2, ESM3 and ESM4, which replaces the previous PSM2-4 mould spraying machine series. ESM is an abbreviation and stands for Efficient Spray Machine.

Lots of innovations

With the exception of the proven guide rails, most of the mechanical parts have been replaced. In particular, the integration of options such as flow measurement, pressure control and pressure booster have been integrated into the horizontal axis to reduce the space required on the die casting machine and the weight on the vertical axis. The design has been reinforced and the stability of the axes has been improved by improving the useful length of the previous guides, resulting in a 25% increase in payload. The ESM is comparable to the previous PSM mould spraying machine in terms of space requirement and console position. Service accessibility has been significantly improved.

Thanks to the complete Industry 4.0 implementation, it is possible to integrate all functions and settings into the user interface of the die casting machines with the newly developed PC3 control. The PC3 already takes future safety requirements into account.

Since the trend in die casting is towards micro-spraying, the supply line for the release agent concentrate has already been integrated into the machine, which considerably simplifies the extension of the Eco-Spray option and the use of dosing nozzles. The selection of release agents for conventional spraying or concentrate spraying is now possible without disassembling the spray tool. ­

EcoSpray

Microspraying with Wollin EcoSpray is becoming more and more important in the current climate debate. By eliminating waste water, reducing release agent consumption and significantly reducing the energy required for compressed air and die temperature control, production conditions in die casting are becoming much more environment-friendly. By reducing the thermal shock caused by strong cooling with water, heat cracks can also be considerably reduced and the die service life significantly increased (+50 to 300%). The component quality is also improved with regard to porosity and surface quality.

The low additional costs for a little more complex mould temperature control and spray technology are very quickly amortized by the savings achieved, often within a few months.

News No: 8333
Date: 2020/01/24 - 19:01
News Source: Foundry Planet

machine ESM  EUROGUSS  mechanical  PSM  EcoSpray 

Comments:

Leave a Comment:

   
   
   
 

Euroguss 2020: Grenzebach shines with broad portfolio

The international trade show in Nuremberg focuses on optimized processing of high-pressure die-cast parts with the Friction Stir Welding technology.
 

KUKA at EUROGUSS 2020

Among other things, visitors to the trade fair can convince themselves of KUKA’s presses, cells and software for the foundry industry.
 

Foseco showcases 6 new Technologies for Die Casting at EUROGUSS

Due to its strong commitment to Research and Development and by working closely together with customers in developing new applications and solutions, Foseco will be showcasing 6 new product and equipment technologies at EUROGUSS, from January 14th to 16th 2020.
 

Ongoing success story for EUROGUSS

Less than three months to go and the Exhibition Centre Nuremberg will again become the meeting place for the die-casting industry for three days, from 14 to 16 January 2020. In 2020 the international trade fair for die casting will again have plenty to offer, with about 700 exhibitors in four halls for the first time, the Die Casting Conference with a top-quality lecture programme, and the special shows “Research for Knowledge” and “Surface Technology”. Another first is the Additive Manufacturing pavilion and the EUROGUSS Talent Award, a prize for emerging talents.
 

Experience the ‘Complete Connected Aluminium Foundry’ at EUROGUSS 2020

Visitors are invited to Experience Seamlessness: Italpresse Gauss and StrikoWestofen to Showcase the ‘Complete Connected Aluminium Foundry’ at EUROGUSS 2020 (14-16 January)
 

EUROGUSS defies the stormy Times in the Die Casting Industry

The times in the die casting industry are currently quite unsettled. Companies are under pressure and raptly following the discussion about the appropriate drive in the car of the next generations.
Upcoming Events
Publications
 Mines & Metals

Mine & Business Today

 Scrap & Recycling

Ahangan

Our partners